Armor Rod Vibration Damper Opgw Tension Assembly

• Type: Vibration Damper
• Certification: ISO
• Customized: Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: OPGW Cable Vibration Dampler
• Condition: New
• Feature: Insulation
• Surface: Smooth Surface
• Use: ADSS Opgw Fiber Optic Cable Accessories
• Cable Diameter: 6.3~19.3 mm or Customized
• Length: 1250~16500mm
• Clamping Section Length: 250~330mm
• Working Temperature: -40~+80c
• Net Weight: 0.26kg/PCS
• Packing Type: Export Carton
• Package Includes: Installation Accessories for ADSS/Opgw
• Installation Accessories 1: for Pole:Stainless Steel Tape
• Function: Protect Cable
• Color Code: Orange/Yellow/Green/Blue
• Packing Quantity: 10PCS/Carton or as Required
• Material 1: Aluminum Alloy
• Material 2: Hot DIP Galvanized Cast Iron
• Transport Package: Export Carton
• Specification: high-strength, high-elasticity PVC plastic
• Trademark: SL
• Origin: China
• HS Code: 8536700000
• Production Capacity: 50000PCS/Month
• Package Size: 45.00cm * 35.00cm * 20.00cm
• Package Gross Weight: 5.000kg

Product Description

Armor Rod Vibration Damper OPGW Tension Assembly 

Product Introduction

Clamp Type Vibration Damper for ADSS/OPGW cables, with tuning fork structure of Damper Weight,  is validated by China Electric Power Research Institute that there are four frequency between 5~150HZ, and its vibration range is wider than FG Damper or FD Damper. Plenty Vibration Dampers have been installed on ADSS cables.

Material and Structure:
Damper Weight---Hot dip galvanized cast iron;  
Messenger Wire---19 strand galvanized steel wires
Clamp--- Aluminum Alloy;                      
Amor Rods--- Aluminum Alloy.

Direction:
1. Vibration Damper can't be directly installed on the ADSS/OPGW Cable,it should install with armor Rods.
2. Calculate the installation distance, if it is within the Armor Rods then install as usual (Install on Armor Rods directly). If the installation position of Vibration Damper is outside of the Inner Preformed Rods, you should install Armor Rods. The distance between the end of Amor Rod of Vibration Damper and Inner Preformed Rods of Fittings must be more than 70mm.
3. The big Damper Weight of low frequency is close to pole or tower.

Application Guide:
1.Vibration Damper can't be directly installed on the ADSS/OPGW Cable,it should install with armor Rods.
2.Calculate the installation distance, if it is within the Armor Rods then install as usual (Install on Armor Rods directly). If the installation position of Vibration Damper is outside of the Inner Preformed Rods, you should install Armor Rods. The distance between the end of Amor Rod of Vibration Damper and Inner Preformed Rods of Fittings must be more than 70mm.
3. The big Damper Weight of low frequency is close to pole or tower.
4. The quantity of damper per span length is according to cable strength, span length and topography. The normal specification is as follows:
 

Cable Diameter Of ADSS/OPGW(mm)	Span Length(m)
	One (Both Two Side)	One (Each Side)	Two (Each Side)	Three (Each Side)
d<12	<=200	200-300	300-600	600-900
12<=d<=22	<=200	200-350	350-700	700-1000

 

Spiral Vibration Damper is made of high-strength, antigenic and high-elasticity PVC plastic, easy to be installed on ADSS cables and OPGW cables which diameter are smaller than 12mm. It is an interference type damper designed to attenuate the energy of cable vibration and restrain cable vibration amplitude by impacting with its damping section, so as to protect cables.

Features:
1.Material:high-strength,antigenic,high-elasticity PVC plastic nonmetallic
2.Easy to install and operate
3.Include gripping section and damping section
4.Protect cable from shaking and damping

Application Guide:
1. Select the specification model for Spiral Vibration Damper is according to cable diameter.
2. The installed Spiral Vibration Damper may be several along the cable or at the same point. Gripping section is close to pole or tower and the length from the end of Damping Section to the end of Inner Preformed Rods for Tension Clamp or Suspension Clamp is 12mm.
3. The quantity of damper per span is confirmed by cable strength and span length. The normal specification is as below:

Applications:For ADSS/OPGW fiber optical cable

ADSS Cable Span	Quantity
<100m	0
100-250m	2
250-400m	4
400-800m	6
800-1000m	8

 

Product Parameters

Spec. Model	Suitable Cable Diameter	Gripping Section	Total Length	Net Weight	Color Code
FTL 0829 125	6.30-8.29mm	250mm	1250mm	0.26 kG	Orange
FTL 1170 130	8.30-11.70mm	250mm	1300mm	0.28 KG	Yellow
FTL 1430 135	11.71-14.30mm	250mm	1350mm	0.30 KG	Green
FTL 1930 165	14.31-19.30mm	330mm	1650mm	0.65 KG	Blue

 

If you need more product information, please visit our company website or send me an inquiry. Thank you~  :)

More Related Products

   ADSS Cable Accessories:

 

Packaging & Shipping

Company Profile

Hunan Shuanglin Communication Technology CoLtd. designs manufactures, and markets all kinds optical fiber cables for outdoor and indoor communication transmission solutions.The company offers ADSS,OPGW,Figure-8,Air-blowing,FTTH drop, Duct cables and all installation accessories

The company has factory and management system, has>15years in fiber cables design and production experiences, can make high quality products according to customer drawing and also can design for them also can provide online technology services. The company has businesses across the Americas, Europe, the Middle East, Africa, and Asia-Pacific.

 

FAQ

Q1.About the price?
Re.We usually quote within 1-2 hours after we confirm the technical data of your products.

Q2.What's the payment method?
Re.We accept T/T,Western Union,MoneyGram,PayPal etc.

Q3.What are your terms of payment?
Re.30% in advance,and 70% before shipment

Q4.How to ship the items to me?
Re.By Courier(DHL,TNT,FEDEX,UPS,EMS),Airfreight,Ocean Ship are available.

Q5.How long is your delivery time?
Re.The general delivery time is 3-5 days after order confirmed,it depends on the order quantity.

Q6.Can you send me a free sample?
Re.Yes,We are willing to send free sample,if you would like to pay the shipping costs.

Q7.Do you accept OEM or ODM?
Re.Yes,we're factory. any your customized requirements we can do our best to help you realize.